2 Burner Tabletop Gas Stove White Flower

Both burners are cast iron and both are rated 3.8 kW, so there is no small side: a large pot can go on either one. Each burner sits in a polished metal bowl under a black enamel-coated pan support, and each has its own knob on the steel front, marked OFF with flame-size symbols.

The top is one sheet of 7 mm tempered glass, 720 × 380 mm, on a grade 410 stainless steel body that stands on ABS plastic feet. The glass is flat, so a spill wipes off once the top has cooled. Tempered glass is tough, but a heavy pot dropped on it or a hard knock on an edge can still break it, so set pans down rather than dropping them.

The whole stove measures 730 × 410 × 135 mm and stands on the counter, with no cut-out and nothing to fit into the worktop. Check the stove's label or manual for the gas pressure it is built for and match the regulator to that figure; ask your gas dealer if you are unsure.

• Two 3.8 kW Burners

  Both burners are rated 3.8 kW, so neither side is the small one and either can take the main pot.

• Cast Iron Burners

  Both burner heads are cast iron, and each sits in a polished metal bowl below its pan support.

• 7 mm Tempered Glass Panel

  One 720 × 380 mm sheet of 7 mm tempered glass covers the top. It is flat, so it wipes clean once it has cooled.

• Stainless Steel 410 Body

  The frame under the glass is grade 410 stainless steel, raised off the counter on ABS plastic feet.

• Enamel-Coated Pan Supports

  A black enamel-coated support stands over each burner to hold the pan.

• Front Knobs

  One knob per burner on the steel front, marked OFF with flame-size symbols and clear of the heat.

• 30,000–50,000 Ignitions

  The built-in igniter is rated for 30,000 to 50,000 lights.

• No Cut-out Needed

  At 730 × 410 × 135 mm it stands on the counter, so there is nothing to fit into the worktop.